Delta-electronics PMC-24V050W1AA User Manual download pdf

Instruction Manual PMC-24V050W1AA

1. Safety Instructions

• To ensure sufficient convection cooling, always maintain a safety

distance of >20mm from all ventilated surfaces while the device is in

operation.

• The device is not recommended to be placed on low thermal

conductive surface, for example, plastics.

• Note that the enclosure of the device can become very hot

depending on the ambient temperature and load of the power supply.

Do not touch the device while it is in operation or immediately after

power is turned OFF. Risk of burning!

• Do not touch the terminals while power is being supplied. Risk of

electric shock.

• Prevent any foreign metal, particles or conductors to enter the

device through the openings during installation. It can cause:

- Electric shock; Safety Hazard; Fire; Product failure

• Warning: When connecting the device, secure Earth connection

before connecting L and N. When disconnecting the device, remove

L and N connections before removing the Earth connection.

2. Device Descriptions

Refer to Fig. 1:

1 Input & Output terminal block connector

2 DC voltage adjustment potentiometer

3 DC OK control LED (green)

3. Installation of the Device

Refer to Fig. 2:

A Mounting holes for power supply assembly onto the mounting surface. Power

supply shall be mounted on minimum 2 mounting holes using M3 screw,

minimum 5mm length.

B This surface belongs to customer’s end system or panel where the power

supply is mounted.

C Connector

• Use flexible cable (stranded or solid), AWG no. 22-12. The torque at the

Connector shall not exceed 13Kgf.cm The insulation stripping length should

not exceed 0.275” or 7mm

4. Installation of Mounting Accessories

• Only use M3 screw <

6mm through the base mounting holes. This is to keep

a safety distance between the screw and internal components.

• Refer to Fig. 4:

Recommended mounting tightening torque: 4 ~ 8Kgf.cm

Fig. 1 Device Descriptions

Base surface

Top

Side surface

Fig. 4 Mounting Screw

Fig. 2 Mounting

www.delta.com.tw/industrialautomation

Side Mounting (Vertical)

Base Mounting (Vertical)

Side Mounting (Horizontal)

Ventilated surface

Fig. 3 Wire Type

Lug

Stri

ed wire

1 2

and internal components 1

Summary of Contents

Page 1 - and internal components

Instruction Manual

Page 2

側面底面 !ֹϡᄲځ३! 1. щБఢቑ! • 與通風表面保持至少 20mm 的安全距離，以確保對流冷卻充分。 • 本產品不適合擺放在低熱導體，例如：塑膠。 • 受環境溫度及產品負載的影響，本機外殼溫度會很高，因此在上電時或切斷電源後短時間內不要觸摸本機，以免燙傷。 • 請勿在上電

Comments to this Manuals

No comments

Delta-electronics PMC-24V050W1AA User Manual

Browse online or download User Manual for Tools Delta-electronics PMC-24V050W1AA. Delta Electronics PMC-24V050W1AA User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Delta-electronics PMC-24V050W1AA